Adjustment/Maintenance; Overview Of Adjustment/Maintenance; Color Registration Procedure - Kyocera TASKalfa 8353ci Operation Manual

Hide thumbs Also See for TASKalfa 8353ci:

Table of Contents

Troubleshooting > Adjustment/Maintenance

Adjustment/Maintenance

If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/

Maintenance in the system menu.

The table below lists the item you can carry out.

Color Registration

Tone Curve Adjustment

Drum Refresh

Laser Scanner Cleaning

Developer Refresh

When first installing the machine or moving it to a new location, color drift during printing may occur. Use this function to

correct the color position of each of cyan, magenta and yellow to resolve color drift.

Auto registration and manual registration are available for Color Registration. Color drift can be largely corrected through

auto registration. However, if it is not resolved or to perform more detailed settings, use the manual registration.

Before performing color registration, be sure to perform Calibration. If color drift remains, perform color

registration. By performing color registration without performing Calibration, the color drift will be resolved

once, however, it may cause the serious color drift later.

Calibration on page 10-60

Auto Correction

Correct the color position to resolve color drift.

When the printed output tone may differ from the original, perform

this function to ensure consistency with the original tone.

Remove image blur and white dots from the printout.

Calibrate the device to ensure correct toner overlapping and

consistency with the original tone.

Remove vertical white lines from the printout.

Adjust the printed image that is too light or incomplete, even though

there is enough toner.

Reference Page

Taskalfa 7353ci