Configuring Job Accounting; Default Setting - Kyocera TASKalfa 8353ci Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Configuring Job Accounting

Configuring Job Accounting

Default Setting

Select the default value for usage limit, and whether or not to enable counting by paper size.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
TASKalfa 7353ci
TASKalfa 8353ci
2
"Job Accounting Settings" [Next] > "Job Accounting (Local)" [Next] > "Default Setting"
[Next] > "Default Counter Limit" [Next]
Configure the settings.
1
Select [Change] for the item you want to modify and then select [+], [-] or use the numeric
keys to enter the default restriction on the number of sheets.
Item
Counter Limit
[Individual] selected for Copy/Printer Count
Copy Restriction
(Total)
Copy Restr. (Full
Color)
Copy Restr.
(SingleColor)
Login User Name
7300
8300
When you add a new account, you can change the default
restrictions on the number of sheets used. You can set any
number from 1 to 9,999,999.
The items that can be set differ depending on whether
[Individual] or [Total] is selected for [Copy/Print Count].
Copy/Printer Count (page 9-56)
Sets the default restriction on the number of sheets used for
copying.
Sets the default restriction on the number of sheets used for
full-color copying.
Sets the default restriction on the number of sheets used for
single-color copying.
9-47
Login Password
7300
8300
Description