Sending To Different Types Of Destinations (Multi Sending) - Kyocera TASKalfa 8353ci Operation Manual

Operation on the Machine > Sending to Different Types of Destinations (Multi Sending)
Sending to Different Types of Destinations
(Multi Sending)
You can specify destinations that combine E-mail addresses, folders (SMB or FTP), fax numbers and i-FAX. This is
referred to as Multi Sending. This is useful for sending to different types of destination (E-mail addresses, folders, etc.) in
a single operation.
No. of broadcast items: Up to 500
However, number of items are restricted for the following sending options.
• E-mail: Up to 100
• Folders (SMP, FTP): Total of 10 SMB and FTP
• i-FAX: Up to 100
Also, depending on the settings, you can send and print at the same time.
Procedures are the same as used in specifying the destinations of respective types. Continue to enter E-mail address or
folder path so that they appear in the destination list. Press the [Start] key to start transmission to all destinations at one
time.
NOTE
• If the destinations include a fax, the images sent to all destinations will be black and white.
• If [Prohibit] is set to "Broadcast", multiple destinations cannot be specified.
Broadcast (page 8-38)
5-38