Adjustment/Maintenance; Overview Of Adjustment/Maintenance; Color Calibration Procedure - Kyocera ECOSYS PA2100CX Operation Manual

Troubleshooting > Adjustment/Maintenance

Adjustment/Maintenance

Overview of Adjustment/Maintenance

If there is an image problem and the message to run adjustment or maintenance menu appears, run Adjustment/
Maintenance in the system menu.
The table below lists the item you can carry out.
Item
Color Calibration
Registration

Color Calibration Procedure

This machine contains a calibration function that automatically makes adjustments to compensate for changes that
occur over time due to variations in the ambient temperature and humidity. So that the highest quality color printing can
be maintained, this color calibration operation is carried out automatically each time the power to the machine is turned
on. If color tone does not improve or color drift does not improve after executing this color adjustment, perform color print
position correction on the following:
Registration Procedure (page 8-21)
1
2
Adjust color drift or hue of printed image in the most appropriate color.
Correct the color position to resolve color drift.
Display the screen.
[Menu] key > [▲] [▼] key > [Adjust/Maintenance] > [►] key
Perform the Color Calibration.
[▲] [▼] key > [ColorCalibration] > [OK] key > [OK] key
Color Calibration begins.
Description
8-20
Reference Page
page 8-20
page 8-21