Kyocera TASKalfa 8353ci Operation Manual page 504

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration
Simple Login Key
Register users to use simple login. You can add up to 20 users.
1
2
Display the screen.
1
[System Menu/Counter] key > [User Login/Job Accounting]
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login as an administrator or as a
user with privileges to carry out this setting.
The factory default login user name and login password are set as shown below.
Model Name
TASKalfa 7353ci
TASKalfa 8353ci
2
"User Login Setting" [Next] > "Simple Login Settings" [Next] > "Simple Login Key" [Next]
Enter the user information.
1
Select the key to which you want to register a user.
2
Select [Add/Edit].
3
"Display Name" [Change] > Enter the user name to be displayed > [OK]
NOTE
For details on entering characters, refer to the following:
Character Entry Method (page 11-9)
4
Select "User" [Change].
5
To specify the user from local users, select [Local User]. To specify from network users,
select [Network User].
The procedure differs depending on the transmission method selected.
Specifying the user from local users
Select the user to be set for simple login.
NOTE
• Select [Name] or [ID] from the "Sort" to sort the account list.
• Select [Search (Name)] or [Search (ID)] to search by account name or account ID.
Login User Name
7300
8300
9-29
Login Password
7300
8300