Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
Item
Send and Forward
Forward
Destination
Color Setting
Scan Resolution
File Format
File Separation
E-mail Subject
FTP Encrypted TX
New Destination Entry
Recall Destination
Broadcast
HighCompressionPDF
Mode
Select whether to forward the original to another destination when sending images.
Select whether to forward the original.
Value: Off, On
NOTE
When selecting [On], select rules to forward from [E-mail], [Folder (SMB)], [Folder
*1
(FTP)], [FAX]
, [i-FAX (Via server-On)]
Set the destination to which the original is forwarded. One destination can be set.
Follow the steps below to register the destination.
•
Address Book
•
E-mail Addr Entry
•
Folder Path Entry
Specifying Destination (page 5-43)
Configure the color settings for forwarded original.
Value: Auto Color (Color/Gray), Auto Color (Color/B & W), Full Color, Grayscale,
Black & White
Select resolution for stored original.
Value: 600x600dpi, 400x400dpi Ultra Fine, 300x300dpi, 200x400dpi Super Fine,
200x200dpi Fine, 200x100dpi Normal
Select the file format of forwarded original.
File format for Send and Forward (page 8-39)
Set whether originals are divided into multiple files before being forwarded.
Value: Off, Each Page
Enter a maximum of 256 characters for the subject of forwarded E-mail.
Character Entry Method (page 11-9)
Set whether originals are encrypted before being forwarded.
Value: Off, On
NOTE
This function is displayed when SSL is set to [On] in Security Settings.
Security Settings (page 8-65)
Select whether to permit direct entry of destination.
Value: Prohibit, Permit
Select whether to permit usage of [Recall] on the Send screen.
Value: Prohibit, Permit
Set whether to enable broadcast.
Value: Prohibit, Permit
Select the compression method for sending High-Compression PDF.
Value: Text Priority, File Size Priority
8-38
Description
*2
, and [i-FAX (Via server-Off)]
*2
.
Advertisement
Table of Contents
Troubleshooting
