Poster - Kyocera TASKalfa 8353ci Operation Manual

Using Various Functions > Functions
Item
Layout B Layout
Border Line
Original
Orientation

Poster

Layout/Edit
Copy
To use this device to make copies larger than the maximum paper size, use Poster mode to separate and copy an
enlarged image onto multiple pages.
The completed copies have overlapping areas. A single large page can be created by pasting those areas together.
Choose one of the following 3 enlargement settings:
Item
Off
Copy Size Metric:
A0, A1, A2,
Inch:
34 × 44", 22 × 34", 17 × 22"
Zoom Priority 100 to 400% (in 1% increments)
Number of 2 sheets, 4 sheets, 8 sheets
Sheets
Value
Top L to R, Top R to L,
Top L to B, Top R to B
None, Solid Line, Dotted Line,
Positioning Mark
Top Edge on Top,
Top Edge on Left, Auto
Original
Value
6-64
Select how to lay out the pages of scanned
original.
Select the boundary line type. Select [Border
Line] to select the page boundary line, and select
[OK].
Select the orientation of the original document top
edge to scan correct direction. Select [Original
Orientation] to choose orientation of the originals,
either [Top Edge on Top] or [Top Edge on Left].
Then select [OK].
Copy
Description
Metric:
Select A0, A1 or A2 as finish size. Copy is enlarged
according to the selected paper size.
Inch:
Select 34 × 44", 22 × 34" or 17 × 22" as finish size. Copy
is enlarged according to selected paper size.
Image will be output on the necessary number of copies
for the specified zoom size.
Select [+] or [-] to change the displayed magnification as
desired. Select [# Keys] to use the numeric keys for
entry.
Copy is enlarged according to the specified number of
sheets.
Description