Sending Documents In Custom Box - Kyocera TASKalfa 8353ci Operation Manual

Operation on the Machine > Using Document Boxes

Sending Documents in Custom Box

When transmitting using wireless LAN, select the interface dedicated to the send function in advance.
Primary Network (Client) (page 8-70)
1
2
Display the screen.
[Home] ( ) key > [Custom Box] > Select the box > [Open]
NOTE
If a custom box is protected by a password, enter the correct password.
Send the document.
1
Select the document you wish to send by checking the checkbox.
The document is marked with a checkmark.
NOTE
You cannot select and send multiple documents.
To deselect, press the checkbox again and remove the checkmark.
2
Select [Send].
NOTE
Depending on the settings, the address book screen may appear.
3
Set the destination.
For more information on selecting destinations, refer to the following:
Specifying Destination (page 5-43)
4
Set the sending size, original image, etc., as desired.
For the features that can be set, refer to the following:
Custom Box (Store File, Printing, Send) (page 6-8)
NOTE
Select the [Program] tab when registering or recalling programs.
Registering Programs (page 5-12)
Recalling Programs (page 5-12)
5
Press the [Start] key.
Sending of the selected document begins.
5-61