Scan To Folder Setup Tool For Smb - Kyocera TASKalfa 8353ci Operation Manual

Preparation before Use > Preparation for Sending a Document to a Shared Folder in a PC

Scan to Folder Setup Tool for SMB

An environment for sending a document to Windows can be set up smoothly by using the Scan to Folder Setup Tool for
SMB contained on the supplied DVD.
By operating the Scan to Folder Setup Tool for SMB, you can configure the following settings.
• Create a shared folder in a PC for receiving documents
A new folder can be easily created on the desktop. Also, the newly created folder is automatically set as a shared
folder.
• Set the created shared folder as an address on this machine
Information about such things as the name of the computer and shared names for the shared folder is easily
recorded in the address book of this machine with a sequence of actions. Can also be registered on the One Touch
Keys.
NOTE
• Log in to Windows with administrator privileges.
• If user login administration is enabled, log in with administrator privileges or as a user with execution authority.
1
2
Insert the DVD.
NOTE
• Installation on Windows must be done by a user logged on with administrator privileges.
• If the "Welcome to the Found New Hardware Wizard" dialog box displays, select
[Cancel].
• If the autorun screen is displayed, click [Run setup.exe].
• If the user account management window appears, click [Yes] ([Allow]).
Display the screen.
1
After clicking [Accept] in the license dialog box, depending on your region, a message about
resource and energy conservation may appear. Read the message and click [OK].
1 Click [View License Agreement]
and read the License Agreement.
2 Click [Accept].
2
3-29