Table of Contents
Advertisement
Setup and Registration (System Menu) > System Menu
LAN Interface
Item
LAN Interface
IMPORTANT
After changing the setting, restart the network or turn the machine OFF and then ON.
Bonjour
[System Menu/Counter] key > [System/Network] > [Network] > [Bonjour]
Item
Bonjour
Wi-Fi Direct
Wi-Fi
Wired Network
IPSec
[System Menu/Counter] key > [System/Network] > [Network] > [IPSec]
Item
IPSec
Protocol Settings
[System Menu/Counter] key > [System/Network] > [Network] > [Protocol Settings]
Configure protocol settings.
Item
SMTP (E-mail TX)
POP3 (E-mail RX)
FTP Client (Transmission)
FTP Server (Reception)
Wi-Fi Direct
Wi-Fi
Wired Network
Specify the settings for the LAN interface to be used.
Value: Auto, 10BASE-T Half, 10BASE-T Full, 100BASE-TX Half, 100BASE-TX Full,
1000BASE-T
Select whether to use Bonjour.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
Select whether to use IPSec.
Value: Off, On
Select whether to send E-mail using SMTP.
Value: Off, On
Select whether to receive E-mail using POP3.
Value: Off, On
Select whether to send documents using FTP. To use the FTP Client, set the protocol
to [On]. The default port number is 21.
Value: Off, On
Select whether to receive documents using FTP.
Value: Off, On
Set whether to enable this function for each network.
Value: Disable, Enable
8-60
Description
Description
Description
Description
*1
Advertisement
Table of Contents
Troubleshooting
