Table of Contents
Advertisement
Installing and Setting up the Machine > Network Setup
IPv4 setting
1
2
Display the screen.
[System Menu/Counter] key > [System/Network] > "Network" [Next] > "Wired Network
Settings" [Next] > "TCP/IP Setting" [Next] > "IPv4" [Change]
Configure the settings.
When using DHCP server
[DHCP]: Set to [On].
When setting the static IP address
[DHCP]: Set to [Off].
[IP Address]: Enter the address.
[Subnet Mask]: Enter the subnet mask in decimal representation (0 to 255).
[Default Gateway]: Enter the address.
When using the Auto-IP
Enter "0.0.0.0" in [IP Address].
When setting the DNS server
In the following cases, set the IP address of DNS (Domain Name System) server.
•
When using the host name with "DHCP" setting set to [Off].
•
When using the DNS server with IP address that is not assigned by DHCP automatically.
Select [Auto (DHCP)] or [Manual]. When [Manual] is selected, you can enter static DNS
server information in the Primary and Secondary fields provided.
IMPORTANT
After changing the setting, restart the network from System Menu, or turn the
machine OFF and then ON.
Restart Network (page 8-66)
NOTE
Ask your network administrator for the IP address in advance, and have it ready when you
configure this setting.
2-33
Advertisement
Table of Contents
Troubleshooting
