Fax; Printer - Kyocera TASKalfa 8353ci Operation Manual

Setup and Registration (System Menu) > System Menu
Item
Quick Setup Registration
Store File
Print
Send
*1 Displayed only when the optional FAX Kit is installed.
*2 Display only when an optional Sheet Finisher is installed. When a punching unit is not installed, this item name is
"Staple".

FAX

[System Menu/Counter] key > [FAX]
Configure settings for FAX.
FAX Operation Guide

Printer

[System Menu/Counter] key > [Printer]
Printing from computers, settings are generally made on the application software screen. However, the following
settings are available for configuring the defaults to customize the machine.
Item
Emulation
Alt Emulation
KPDL Error Report
Select the functions to be registered for Quick Setup. Six keys of the Quick Setup
screen are allocated to typical functions but can be changed as necessary.
Select the functions to be registered for Store File Quick Setup.
Color Selection, Storing Size, Density, 2-sided/Book Original, Scan Resolution,
Zoom, Original Orientation, Original Size, Original Image, Continuous Scan,
Background Density Adj.
Value: Off, Key 1 to 6
Select the functions to be registered for Print Quick Setup.
Paper Selection, Collate/Offset, Staple/Punch, Duplex
Printed, Color Selection
Value: Off, Key 1 to 6
Select the functions to be registered for Send Quick Setup.
Sending Size, FAX TX Resolution, File Format, Delete after Transmitted, Color
Selection
Value: Off, Key 1 to 6
Select the emulation for operating this machine by commands oriented to other types
of printers.
Value: PCL6, KPDL, KPDL (Auto)
NOTE
When you have selected [KPDL (Auto)], set "Alt Emulation", too.
When you have selected [KPDL] or [KPDL (Auto)], set "KPDL Error Report", too.
When you have selected [KPDL (Auto)] as emulation mode, you can switch between
KPDL and another emulation mode (alternative emulation) automatically according to
the data to print.
Value: PCL6
When an error has occurred during printing in KPDL emulation mode, set whether or
not the error report is output.
Value: Off, On
8-43
Description
*2
, Combine, Delete after
Description