Installing and Setting up the Machine > Default Settings of the Machine
NOTE
Use the [
] or [
When you select the [
Network Setup
Configuring the Wired Network
The machine is equipped with network interface, which is compatible with network protocols such as TCP/IP
(IPv4), TCP/IP (IPv6), NetBEUI, and IPSec. It enables network printing on the Windows, Mac, UNIX and other
platforms. The configuration methods are as follows:
Configuration Method
Configuring the Connection from
the Operation Panel on This
Machine
Configuring Connections on the
Web Page
Setting the Connection by Using
the Setup Utility of IB-50
NOTE
When you want to switch to the network interface other than Wired (default) after installing an optional Network
Interface Kit (IB-50) and a Wireless Network Interface Kit (IB-37/IB-38/IB-51), select the desired setting on [Primary
Network].
➡
Primary Network (page 219)
For other network settings, refer to the following:
➡
Network (page 200)
] key to enter numbers.
] or [
] keys, the input position moves to the left or right and is highlighted.
Use Wired Network Settings or Optional Network to configure the
network in details from System menu.
➡
Wired Netwk. Set (page 208)
➡
Optional Network (page 222)
For the equipped network interface, the connection can be set by using
Command Center RX. For the IB-50, the connection can be set on the
dedicated Web page.
➡
Command Center RX User Guide
➡
IB-50 Operation Guide
This is the setup tool included in the CD of IB-50. You can use it on
Windows.
➡
IB-50 Operation Guide
Description
45