Plessey Set Length 1; Plessey Set Length 2 - Datalogic Gryphon 2D Series Reference Manual

ENTER/EXIT PROGRAMMING MODE

Plessey Set Length 1

This feature specifies one of the bar code lengths for "
. Length 1 is the minimum label length if in Variable Length Mode, or the first fixed
199
length if in Fixed Length Mode. The length includes the bar code's check and data char-
acters.
The length can be set from 1 to 50 characters. See "
detailed programming instructions.
Select Plessey Length 1 Setting
$CPLL1
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Plessey Set Length 2

This feature specifies one of the bar code lengths for "
. Length 2 is the maximum label length if in Variable Length Mode, or the second
199
fixed length if in Fixed Length Mode. The length includes the bar code's check and data
characters.
Length can be set from 1 to 50 characters. A setting of 00 specifies to ignore this length
(only one fixed length). See "
instructions.
Select Plessey Length 2 Setting
$CPLL2
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.
200
GRYPHON™ I GD/GBT/GM4500
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 1 = 01 (one character)
Set Length 2" on page 294
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

Length 2 = 50 (50 characters)
1D SYMBOLOGIES
Plessey Length Control" on page
Set Length 1" on page 293
Appendix D, Keypad represent-
CANCEL
Plessey Length Control" on page
for more detailed programming
Appendix D, Keypad represent-
CANCEL
for more