Plessey Set Length 1 - Datalogic QuickScan I QM2131 Product Reference Manual

Plessey Set Length 1

This feature specifies one of the barcode lengths for
page
302 Mode, or the first fixed length if in
includes the barcode's data characters only. The length can be set from 01 to
50 characters.
Table 3
detailed instructions on setting this feature.
Table 3. Plessey Length 1 Setting Examples
STEP ACTION
1 Desired Setting
2
3
Scan Two Characters From
4
Appendix D, Keypad
5
Select Plessey Set Length 1 Setting
Make a mistake? Scan the CANCEL barcode to abort and not
save the entry string. You can then start again at the beginning.
Product Reference Guide
248. Length 1 is the minimum label length if in
provides some examples for setting Length 1. See
01 Characters
Scan ENTER/EXIT PROGRAMMING MODE
Scan SELECT Plessey LENGTH 1 SETTING
'0' and '1'
Scan ENTER/EXIT PROGRAMMING MODE
01 = Length 1 is 1 Character
Plessey Length Control on
Variable Length on page
Fixed Length on page 302
EXAMPLES
07 Characters 15 Characters
'0' and '7' '1' and '5'
CANCEL
Plessey
Mode. Length
page 302 for
50 Characters
'5' AND '0'
249