Table of Contents
Advertisement
Deleting a Logical Drive
To delete a logical drive from a disk array:
1.
From the Main Menu, highlight Disk Array Management and press Enter.
2.
Highlight the disk array that contains the logical drive you want to delete and
press Enter.
3.
Highlight the logical drive you want to delete and press the spacebar to mark
it.
The mark is an asterisk (*) to the left of the listing.
4.
Highlight Delete Marked Logical Drives and press Enter.
5.
Press Y to confirm the deletion.
If you did not use all of the available capacity of the disk array, you
can create an additional logical drive at this point.
When you delete a logical drive, you delete all the data it contains.
Back up all important data before deleting a logical drive.
Chapter 5: Management with the CLU
Note
Caution
157
Advertisement
Table of Contents
