Shutting Down The Subsystem; Shutting Down The Vtrak - Telnet Connection; Shutting Down The Vtrak - Serial Connection - Promise Technology VTrak M610i Product Manual

VTrak M610i, M310i, M210i Product Manual

Shutting Down the Subsystem

There are two methods for shutting down the subsystem. Choose one of the
following procedures:
• Shutting down the VTrak – Telnet Connection (page 194)
• Shutting down the VTrak – Serial Connection (page 194)
Shutting down the VTrak – Telnet Connection
This function enables you to shutdown the VTrak subsystem on a Telnet
connection. You can only do part of this procedure in the CLU. Additional action is
required, as described below.
To shutdown the VTrak:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Shutdown or Restart and press Enter.
4. Highlight Option and press the spacebar to display Restart.
5. Highlight Submit and press Enter.
A warning message appears.
6. Press Y to continue.
The screen will go blank.
7. Wait for no less than two minutes.
8. Manually turn off the power supply switches on the back of the subsystem.
Shutting down the VTrak – Serial Connection
This function enables you to shutdown the VTrak subsystem on a serial
connection. You can only do part of this procedure in the CLU. Additional action is
required, as described below.
To shutdown the VTrak:
1. From the Main Menu, highlight Additional Info and Management and press
Enter.
2. Highlight Shutdown or Restart and press Enter.
3. Highlight Shutdown or Restart and press Enter.
4. Highlight Option and press the spacebar to display Restart.
5. Highlight Submit and press Enter.
A warning message appears.
6. Press Y to continue.
194