Promise Technology VTrak M610i Product Manual page 25

4. Square the rail assemblies in the rack.
5. Tighten the adjustment screws and the attaching screws.
6. Place the VTrak subsystem onto the rails.
7. Secure the VTrak subsystem to the rack through each handle, using the
attaching screws from your rack system.
Figure 2. Rack mount assembly diagram
Rack front post
Rail adjustment screw
Inside of post
Rail attaching screw
(not included)
Front rail
Rail attaching screw
(not included)
Rear rail
Flange
Support
Rail adjustment screw
11
Chapter 2: VTrak Installation
Rack back post
Inside of post