Table of Contents
Advertisement
VTrak M610i, M310i, M210i Product Manual
An iSCSI initiator name is the iSCSI name of the initiator device and is
composed of a single text string. iSCSI WWNs are somewhat different from
regular WWNs.
Obtain the initiator name from the initiator utility on your host system.
Note that the initiator name you input must match exactly in order for the
connection to work.
5.
Press Ctrl-A to save the initiator.
Deleting Initiators
To delete an iSCSI initiator:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
3.
Highlight the initiator you want to delete and press the spacebar to mark it.
The mark is an asterisk (*) to the left of the listing.
4.
Highlight Delete Marked Initiators and press Enter.
5.
Press Y to confirm the deletion.
Mapping LUNs to Initiators
To map a LUN to an iSCSI initiator:
1.
From the Main Menu, highlight Additional Info and Management and press
Enter.
2.
Highlight LUN Mapping and press Enter.
3.
Highlight an existing Initiator and press Enter.
A list of logical drives displays.
4.
In the LUN field, press the backspace key to erase the current value, then
type the LUN you want to assign to this initiator, from 0 to 255.
If you make a error, press Ctrl-R to restore the current LUN.
5.
Press Ctrl-A to save the LUN map.
LUN Mapping must be enabled in order for VTrak to recognize the
initiator.
Note
180
Advertisement
Table of Contents
