Table of Contents
Advertisement
Figure 17.Loosen the thumbscrews and remove the cover (M310i/m210I)
Loosen the thumbscrews
5.
Remove the two screws holding the battery assembly in place.
6.
Detach the connector on the circuit board.
Do not detach any other connectors. See Figures 18 and 19.
Figure 18. Removing the battery assembly screws and detaching the
connector (M610i)
Remove this screw
Detach this connector
213
Chapter 6: Maintenance
Lift the cover
Battery Assembly
Remove this screw
Advertisement
Table of Contents
