Deleting A Logical Drive; Migrating A Disk Array - Promise Technology VessRAID 1740s Product Manual

VessRAID 1740s, 1840s Product Manual
13. Click the Update button to enter the logical drive parameters.
14. Review the results. If there is remaining space the disk array, you can create
another logical drive, following the steps above. Each logical drive can have
a different set of parameters.
15. Click the Next button when you are done.
A new window displays with the disk array information and the proposed
logical drives with their parameters.
16. Click the Submit button create the logical drives.
The new logical drive appears in the Logical Drive List the Information tab.
If you created a fault-tolerant logical drive (any RAID level except RAID 0), the
Operational Status of new logical drive will display Synchronizing for several
minutes after creation. You can use the logical drive during this period but read/
write performance could be slower than normal.

Deleting a Logical Drive

To delete a logical drive:
1. Click the Subsystem
2. Click the Disk Arrays
3. Click the Disk Array
4. Click the Delete LD tab in Management View.
5. Check the box to the left of the logical drive you want to delete.
6. Click the Submit button.
In the confirmation box, type the word confirm in the field provided.
7. Click the OK button.
The selected logical disappears from the Logical Drive List the Information tab.

Migrating a Disk Array

The action of migrating a disk array means either or both:
• Change the RAID Level
• Expand the storage capacity
All data the logical drive will be lost. Back up any valuable data
before deleting the logical drive.
icon in Tree View.
icon.
icon.
Caution
106