Table of Contents
Advertisement
•
Highlight Cache Flush Interval and press the backspace key to erase
the current value. Type a new interval value (1 to 12 seconds).
•
Highlight SMART and press the spacebar to toggle between Enable and
Disable.
•
Highlight SMART Poll Interval and press the backspace key to erase the
current value. Type a new interval value (1 to 1440 minutes).
•
Highlight Adaptive Writeback Cache and press the spacebar to toggle
between Enabled and Disabled.
6.
Press Ctrl-A to save your settings.
Locating the Controller
To locate this controller:
1.
From the Main Menu, highlight Subsystem Management and press Enter.
2.
Highlight Controller Management and press Enter.
3.
Highlight the controller you want and press Enter.
4.
Highlight Controller Settings and press Enter.
5.
Highlight Locate Controller and press Enter.
Controller Dirty Cache
Controller, will flash for one minute.
Chapter 5: Management with the CLU
LED and Status
139
LED, on the back of the
Advertisement
Table of Contents
