Table of Contents
Advertisement
Belt Maintenance
Replacing the Belt
Service Interval: Every 1,000 hours
1.
Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2.
At the bottom, front of the engine, insert a socket
wrench or breaker bar into the idler tension arm,
and move the bracket up to relieve belt tension
(Figure
90).
Figure 90
1. Idler tension arm
3.
Slip the belt from the pulleys
Figure 91
44).
g363632
(Figure
91).
g363633
57
4.
Route the new belt around the pulleys as shown
in
Figure
92.
Figure 92
5.
Remove the socket wrench or breaker bar from
the idler tension arm.
g363631
Advertisement
Table of Contents
