Toro Field Pro 604 Operator's Manual page 31

Up-Stop Stop-Pin Positions
Insert a stop pin into an up-stop attachment-stop hole
when you want to repeatability limit how high you can
raise the mid-mount attachment. The up-stop position
helps speed the process of raising or lowering the
attachment at the end or beginning of each working
pass.
1. 51 mm (2.0 inches)
2. 38 mm (1.5 inches)
Above-Grade Stop-Pin Positions
Insert a stop pin into an above-grade attachment-stop
hole when you want to repeatability lower the
mid-mount attachment to a selected above-grade
position.
Figure 42
3. 25 mm (1.0 inch)
g384261
g384263
1. 44 mm (1.75 inches)
2. 38 mm (1.5 inches)
3. 19 mm (0.75 inch)
4. 13 mm (0.5 inch)
5. 32 mm (1.25 inches)
31
Figure 43
6. 6 mm (0.25 inch)
7. 3 mm (0.12 inch)
8. 25 mm (1.0 inch)
9. 51 mm (2.0 inches)
g384265
g384264