Lowering The Operator's Cushion; Raising The Operator's Cushion - Toro Field Pro 604 Operator's Manual

Lowering the Operator's
Cushion
1. Loosen the 2 knobs that secure the operator's
cushion to the control tower
Important:
The knobs are designed to
remain on the machine; loosen each knob
a only few turns, this prevents you from
accidentally stripping them free of the
retainers.
Figure 67
1. Knobs
2. Lower the operator's cushion
(Figure 67).
g333931
2. Operator's cushion
(Figure 67).
Raising the Operator's
Cushion
1. Rotate up the operator's cushion
Note:
Ensure that the slots in the frame of the
cushion are fully seated to the flange bushings
inboard of the knobs.
1. Operator's cushion
2. Tighten the 2 knobs
46
(Figure
Figure 68
2. Knobs
(Figure 68).
68).
g333932