Controls; Engine And Attachment Controls - Toro Field Pro 604 Operator's Manual

Controls

Engine and Attachment Controls

Figure 22
1. Throttle lever
2. Mid-mount attachment lift
control
3. Mid-mount attachment tilt
control
4. Rear attachment lift control
Throttle Lever
Use the throttle lever (Figure
speed.
Rear Attachment Lift Control
Use the rear attachment lift control to raise or lower
an optional rear installed attachment.
g384032
5. Engine choke
6. Hour meter/controller
7. Ignition key and switch
22) to control the engine
Mid-Mount Attachment Tilt Control
Use the mid-mount attachment tilt control to adjust the
engagement angle of the mid-mount attachment.
Mid-Mount Attachment Lift Control
Use the mid-mount attachment lift control to raise or
lower the mid-mount attachment.
Choke Control
Use the choke control
position for cold-engine starting.
Hour Meter/Controller
The hour meter and controller
the following functions:
•
Displays the total hours of engine operation.
•
Provides control for the safety interlock system and
displays indicators for the following components:
– Parking brake is in the E
– Motion controls are in the N
– Operator is standing on the operator's platform.
•
Indicates the voltage and low charging-system
operation.
Ignition Key and Switch
Use the ignition switch to start and hut off the engine.
17
(Figure 22) to adjust the choke
(Figure 22) preforms
position.
NGAGED
position.
EUTRAL