Adjusting The Height Of The Mid-Mount Attachment - Toro Field Pro 604 Operator's Manual

Adjusting the Height of the
Mid-Mount Attachment
Raising the Mid-Mount Attachment
1. Park the machine on a level surface and engage
the parking brake.
2. If you want to fully raise the mid-mount
attachment remove the stop pin from the up-stop
attachment-stop hole, and insert it into the
stow attachment-stop hole; refer to
Attachment Stop (page
3. With the engine running, pull back the mid-mount
attachment lift control to raise the mid-mount
attachment(Figure
Figure 31
1. Mid-mount attachment control
Mid-Mount
30).
31).
Lowering the Mid-Mount
Attachment
1. Park the machine on a level surface.
2. If needed, adjust the mid-mount attachment
stop depth; refer to
During Operation (page
3. With the engine running, push forward the
mid-mount attachment lift control to lower the
mid-mount attachment
g384220
1. Mid-mount attachment control
g358791
26
Using the Attachment Stop
33).
(Figure 32).
Figure 32
g384219
g358800