Before Operations Checks; Checking The Safety-Interlock System - Toro Field Pro 604 Operator's Manual

Using Stabilizer/Conditioner
Always use fuel stabilizer/conditioner in the machine
to keep the fuel fresh longer.
Important:
Do not use fuel additives containing
methanol or ethanol.
Add the amount of fuel stabilizer/conditioner to fresh
fuel as directed by the fuel-stabilizer manufacturer.
Filling the Fuel Tank
Fuel Tank Capacity: 31.4 L (8.3 US gal)
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
Figure 24
2. Clean around the fuel-tank cap, and remove it.
3. Fill the fuel tank to 25 mm (1 inch) below the
filler neck.
Note:
Do not fill the fuel tank completely full.
The empty space in the tank allows the fuel to
expand.
4. Assemble the fuel-tank cap to the filler neck of
the tank.

Before Operations Checks

Perform the following daily procedures before
operating the machine:
•
Checking the Engine-Oil Level (page 49)
•
Checking the Tire Air Pressure (page 56)
•
Checking the Hydraulic Lines and Hoses (page
58)
•
Checking the Hydraulic-Fluid Level (page 58)
Checking the
Safety-Interlock System
Service Interval: Before each use or daily
Checking the Parking
Brake-Interlock Switches
1. Stand on the operator's platform.
2. Disengage the parking brake.
3. Move the motion-control bars to the N
position.
4. Try starting the engine.
Important:
If the engine starts, shut off the engine,
remove the key, and contact you authorized
Toro distributor for service.
Checking the Motion
Control-Interlock Switches
1. Stand on the operator's platform.
2. Engage the parking brake.
g334006
3. Move the left motion-control bar to the F
position.
4. Try starting the engine.
5. Move the right motion-control bar to the
F
ORWARD
6. Try starting the engine.
Important:
If the engine starts, shut off the engine,
remove the key, and contact you authorized
Toro distributor for service.
20
The engine should not start.
position.
The engine should not start.
EUTRAL
ORWARD