Mid-Mount Attachment Stop - Toro Field Pro 604 Operator's Manual

Mid-Mount Attachment
Stop
Attachment Stop Description
Use the stop pins and the mid-mount attachment
stop to limit how far up or down you can position
the mid-mount attachment, when transporting the
machine, and when maintaining the mid-mount
attachment.
Figure 40

1. Mid-mount attachment stop

You can use a combination of stop pin positions
depending on your task.
Task Stop Pin 1
Transporting Transport and
the machine maintenance
or maintaining position
the mid-mount
attachment
Limit the Above grade
mid-mount position, grade
attachment position, or below
raised or lowered grade position
positions
Limit the Above grade
mid-mount position, grade
attachment position, or below
lowered position grade position
Operate the Stow Position
mid-mount
attachment with
a full raise and
lower range
Transport and Maintenance Stop-Pin Position
Insert a stop pin into the transport and maintenance
position attachment-stop hole when you transport the
machine between job sites, or when you adjust or
maintain the mid-mount attachment. The transport
and maintenance position lock the mid-mount
attachment at the highest position.
g384039
Stop Pin 2
Stow position
Up-stop positions
or stow position
1. Transport and maintenance position
Stow position
Stow position
30
Figure 41
g384262
g384260