Adjusting The Backrest Position - Toro Field Pro 604 Operator's Manual

Checking the Operators
Platform-Interlock Switches
1. Engage the parking brake.
2. Move the motion-control bars to the N
position.
3. Step off the operator's platform, and stand on
the ground.
4. Try starting the engine.
Important:
The engine should not start.
If the engine starts, shut off the engine,
remove the key, and contact you authorized
Toro distributor for service.
Adjusting the Backrest
Position
1. Remove the 4 bolts and 4 washers that secure
the backrest pad to the mounting plate
EUTRAL
25).
1. Backrest pad
2. Washer
2. Raise or lower the backrest pad.
3. Align the hole in the backrest pad with the holes
in the mounting plate.
4. Secure the pad to the plate with the 4 bolts and
4 washers.
21
Figure 25
3. Bolt
4. Mounting plate
(Figure
g359257