Driving The Machine - Toro Field Pro 604 Operator's Manual

Driving the Machine

CAUTION
Machine can spin very rapidly by positioning
1 lever too much ahead of the other. You may
lose control of the machine, which may cause
damage to the machine or injury.
• Use caution when making turns.
• Slow the machine down before making
sharp turns.
Driving Forward
Note:
The engine shuts off if you move the
motion-control bars with the parking brake engaged.
1. Move the motion-control bars to the N
position.
2. Disengage the parking brake; refer to
the Parking Brake (page
3. To drive the machine forward, perform the
following:
Note:
The machine moves faster the farther
the motion-control levers are moved from the
N position.
EUTRAL
•
To move forward in a straight line, move both
motion-control bars forward at the same
time.
Figure 29
EUTRAL
Operating
23).
g334482
•
To turn left or right, pull the motion-control
bar back toward neutral in the desired turn
direction.
•
To stop the machine, move both
motion-control bars to the N
Driving Backward
1. Move the motion-control bars to the N
position.
2. Raise the mid-mount attachment and optional
rear attachment.
3. To drive the machine backward, perform the
following:
Note:
The machine moves faster the farther
the motion-control levers are moved from the
N position.
EUTRAL
•
To move backward in a straight line, move
both motion-control bars backward at the
same time.
•
To turn left or right, release pressure on the
motion-control bar toward the desired turn
direction.
•
To stop the machine, move both
motion-control bars to the N
25
EUTRAL
EUTRAL
Figure 30
EUTRAL
position.
g334481
position.