Table of Contents
Advertisement
Pre-Maintenance
Procedures
Important:
Determine the left and right sides of the machine from the normal operating position.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and
seriously injure you or other bystanders.
Remove the key from the ignition before you do any maintenance.
Preparing for Maintenance
1.
Park the machine on a level surface.
2.
Ensure that the traction is in neutral.
3.
Engage the parking brake.
4.
Move the throttle to the S
5.
If installed, lower the mid-mount attachment and optional rear attachment.
6.
Shut off the engine and remove the key.
7.
Wait for all moving parts to stop.
8.
Allow engine to cool.
Figure 62
position.
LOW
44
g366682
Advertisement
Table of Contents
