Lubrication; Greasing The Bearings And Bushings - Toro Field Pro 604 Operator's Manual

Lubrication

Greasing the Bearings and
Bushings
Service Interval: Every 50 hours Grease the bearings
and bushings after every washing.
Grease Specification: No. 2 lithium grease
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page
2. Wipe the grease fittings clean
3. Pump grease into the fittings.
4. Wipe off excess grease.
Note:
Improper wash-down procedures can
negatively affect bearing life. Do not wash down
the machine when it is still hot and avoid directing
high-pressure or high-volume spray at the bearings
or seals.
44).
1. Grease fittings
g396179
1. Grease fitting
48
Figure 71
Front Axle
2. Axle
Figure 72
Mid-mount Attachment Lift Cylinder
2. Mid-mount attachment lift
cylinder
g366684
g384362