Operating The Attachment Power Lift; Adjusting The Dial-A-Height - Toro 79362 Operator's Manual

2
1
Figure 14
1. Lift lever
2. Button
Operating the Attachment
Power Lift
The attachment power lift (Fig. 15) is used to raise and
lower attachments.
Raising the Snowthrower
1. Start the engine, refer to; Starting and Stopping the
Engine; in tractor Operator's Manual.
2. Pull the lift lever in the up direction to raise the
attachment lift (Fig. 15). This will lift and hold the
snowthrower in the up, or raised position.
Lowering the Snowthrower
1. Start the engine, refer to; Starting and Stopping the
Engine; in tractor Operator's Manual.
2. Push the lift lever in the down direction to lower the
attachment lift (Fig. 15). This will lower the
snowthrower.
3
m–2514
3. Dial-A-Height
12
2
1
Figure 15
1. Lift lever UP

Adjusting the Dial-A-Height

The Dial-A-Height control (Fig. 14) is used to limit the
downward travel of the attachment. The Dial-A-Height
knob is rotated to change the location of this stop, up or
down.
1. Raise the attachment lift: Refer to Raising
Attachments. In the raised position the Dial-A-Height
knob (Fig. 14) can be rotated to change the stop
location. Turn clockwise to raise and counterclockwise
to lower the height of the attachment.
2. The Dial-A-Height indicator (Fig. 14) will show the
change, high to low, in attachment lift height as
adjustment is made.
m–2454
2. Lift lever DOWN