Transporting The Power Rake; Stopping The Power Rake; Transport Position - Toro Direct Drive Power Box Rake Operator's Manual

Transporting the Power
Rake
Transport the power rake by using the lift points
shown in Figure 9.
Important:
Lifting the power rake at other points
can damage the machine.
Note:
Lift the machine carefully with proper lifting
accessories.
1. Lift point
Figure 9

Stopping the Power Rake

1. Stop the engine on the traction unit.
2. Lower the lift arms of the traction unit, and lower
the power rake to the ground.
3. Turn off the engine, set the parking brake, and
remove the key from the ignition of the traction
unit.

Transport Position

When transporting the attachment, keep it as close
to the ground as possible, no more than 15 cm (6
inches) above the lowest position. Tilt it rearward.
1. No more than 15 cm (6
inches) above the lowest
position
g026186
8
Figure 10
2. Tilt the attachment
rearward.
g417952