Positioning Original On Platen Glass - Konica Minolta 7222 User Manual

Positioning Original on Platen Glass

Use the platen glass when originals are not suitable for use with the document feeder,
e.g., when size is incompatible, when originals are folded, stapled, torn, or in otherwise
poor condition.
1.
Raise the document feeder (or platen cover).
Place original FACE DOWN in the left rear corner, aligning the edge with the left
measuring guide.
2.
Gently close the document feeder (or platen cover) to prevent the
original from shifting on the glass.
When selecting Dual Page, Non-Image Area Erase, AUTO mode in Repeat,
or AUTO Layout, DO NOT CLOSE the document feeder or platen cover. For
details on each function, see Section 9.
3.
When repeating the original placement, press the release lever under
the document feeder.
Positioning Originals (continued)
3
Copying
Operations
Positioning
Originals
Setting Print
Quantity
Stop
Scan/Print
Paper Size
Lens Mode
Density
1-2, 2-2
2-1
Multi-Sheet
Bypass Tray
Using
Memory
Output without
Finisher
Output with
Finisher
Staple
Punch
Fold /
Fold&Stitch
Output with
Inner Tray
3-5