Table of Contents
Advertisement
4)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Note
f When you connect a device to the projector using "Wireless Manager ME6.3", setting [PASSWORD] to [ON] to require password entry is
recommended.
f When you use functions of "Multi Monitoring & Control Software" for simultaneous image distribution or deleting distributed images, images
cannot be distributed to the projector on which [PASSWORD] is set to [ON]. To use those image distribution functions, set it to [OFF].
Performing [PASSWORD CHANGE]
Set or change the password to connect to the projector.
1)
Press as to select [Panasonic APPLICATION].
2)
Press the <ENTER> button.
f The [Panasonic APPLICATION] screen is displayed.
3)
Press as to select [PASSWORD CHANGE].
4)
Press the <ENTER> button.
f The [PASSWORD CHANGE] screen is displayed.
5)
Press asqw to select characters, and press the <ENTER> button to enter.
6)
Press asqw to select [OK], and press the <ENTER> button.
f To cancel, select [CANCEL].
Note
f Up to eight characters can be set for a password.
f A password is not set in factory default settings. Since connection without password entry is available even when [PASSWORD] is set to
[ON], be sure to set a password in [PASSWORD CHANGE] if you set [PASSWORD] to [ON].
f Change the password periodically and make it hard to guess.
[NETWORK STATUS]
Display the status of the projector network.
1)
Press as to select [NETWORK STATUS].
2)
Press the <ENTER> button.
f The [NETWORK STATUS] screen is displayed.
3)
Press qw to switch the pages.
f The page will change each time you press the button.
[PROJECTOR NAME]
[NETWORK ID]
[WIRED LAN]
88 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Disables password entry.
Enables password entry.
Displays the projector name set on the projector.
The projector name can be changed to a desired name. (x page 82)
Displays the network ID (fixed) given to the projector.
Displays the network information of the wired LAN set on the projector.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
[MAC ADDRESS]
Displays the status of use of DHCP server.
Displays the IP address.
Displays the subnet mask.
Displays the default gateway.
Displays the address of the primary DNS server.
Displays the address of the secondary DNS server.
Displays the MAC address of wired LAN.
Advertisement
Table of Contents
