Panasonic PT-JX200GWU Operating Instructions Manual page 34

Chapter 2 Getting Started — Installing/removing the projector
4) Completely insert the power connector of the supplied adapter into the <AC IN> terminal on the
power supply unit.
f Check the shapes of the <AC IN> terminal on the power supply unit and the power connector of the
adapter, and insert the power connector into the <AC IN> terminal completely.
5) Attach the supplied connector secure lock.
f Attach the connector secure lock from under the <AC IN> terminal on the power supply unit along the
guides on both sides.
f Confirm that the power connector of the adapter is placed inside the ribs of the connector secure lock (the
power supply unit side) as shown in the figure.
6) Put the string of the adapter cover on the connector secure lock.
f Put the string already attached to the supplied adapter cover on the connector secure lock as shown in the
figure.
7) Fix the connector secure lock.
f Push the connector secure lock in until the tab of the connector secure lock clicks with the string put on.
Be careful not to get the string caught in the tab.
34 - ENGLISH
<AC IN> terminal
Guide
Guide
Connector secure lock
String
Adapter cover
Power connector
Adapter
Connector secure lock
Power connector
Ribs