Table of Contents
Advertisement
Click [Detailed set up] → [Ping test].
1
[Input IP address]
Enter the IP address of the server to be tested.
2
[Submit] button
Executes the connection test.
[ECO management set up] page
Settings related to the ECO management function of the projector can be made.
Click [Detailed set up] → [ECO management set up].
1
[LIGHT POWER]
Selects the light source power setting.
2
[AV MUTE DETECTION]
Selects to enable ([ON])/disable ([OFF]) the AV mute detection
function.
3
[NO SIGNAL SHUT-OFF]
When [NO SIGNAL SHUT-OFF] is used, select the time until the
projector goes into the standby status.
Note
f For details of each setting item, refer to the [SETUP] menu → [ECO MANAGEMENT] (x page 74) of the projector.
[E-mail set up] page
When a problem occurs, an E-mail can be sent to the E-mail addresses (up to two) that have been set
beforehand.
122 - ENGLISH
Chapter 5 Operations — Web control function
1
2
3
Example of display when the connection has succeeded
4
Example of display when the connection has failed
1
2
3
4
5
4
[NO SIGNAL LIGHTS-OUT]
When [NO SIGNAL LIGHTS-OUT] is used, select the time until
the light source goes out.
5
[Submit] button
Updates the settings.
3
4
Advertisement
Table of Contents
