[Network Status]; [Digital Link Menu]; [Art-Net Setup] - Panasonic PT-SMZ16KCL Operating Instructions (Functional Manual)

[EXTRON XTP]
[TYPE SELECT]
4) Press as to select [STORE], and press the <执行> button.
f The confirmation screen is displayed.
5) Press qw to select [OK], and press the <执行> button.
Note
f The <DIGITAL LINK> terminal and the <局域网> terminal are connected inside of the projector when [TYPE SELECT] is set to [LAN &
DIGITAL LINK]. Do not directly connect the <DIGITAL LINK> terminal and the <局域网> terminal using a LAN cable. Construct the system
so that it is not connected to the same network via the peripherals such as the hub or the twisted-pair-cable transmitter.

[NETWORK STATUS]

Display the status of the projector network.
1) Press as to select [NETWORK STATUS].
2) Press the <执行> button.
f The [NETWORK STATUS] screen is displayed.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
[MAC ADDRESS]
Note
f The network setting is common for the <局域网> terminal and the <DIGITAL LINK> terminal.

[DIGITAL LINK MENU]

When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100C) is connected to the
<DIGITAL LINK> terminal, the main menu of the connected DIGITAL LINK output supported device is displayed.
Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.
Note
f [DIGITAL LINK MENU] cannot be selected when the [NETWORK] menu → [NETWORK CONTROL] → [EXTRON XTP] is set to [ON].
f The operation guidance for the "RETURN" button is in the menu screen of the Digital Interface Box. The projector does not have the
"RETURN" button, but the same operation is available with the <菜单> button.

[Art-Net SETUP]

Make settings to use the Art-Net function.
1) Press as to select [Art-Net SETUP].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON(2.X.X.X)]
[ON(10.X.X.X)]
Chapter 4 Settings — [NETWORK] menu
Set to [ON] when connecting the "XTP transmitter" of Extron Electronics to the <DIGITAL LINK>
terminal.
Set to [OFF] when connecting the optional DIGITAL LINK output supported device (Model No.:
ET-YFB100C).
For details of the "XTP transmitter", visit the website of Extron Electronics.
URL http://www.extron.com/
[LAN]
[DIGITAL LINK]
[LAN & DIGITAL LINK]
Displays the status of use of the DHCP server.
Displays the [IP ADDRESS].
Displays the [SUBNET MASK].
Displays the [DEFAULT GATEWAY].
Displays the address of the preferred DNS server.
Displays the address of the alternate DNS server.
Displays the [MAC ADDRESS].
Disables the Art-Net function.
Enables the Art-Net function and sets the IP address to 2.X.X.X.
Enables the Art-Net function and sets the IP address to 10.X.X.X.
Select this item when using only the <局域网> terminal to transmit
the Ethernet signal.
Select this item when using only the <DIGITAL LINK> terminal to
transmit the Ethernet signal.
Select this item when using the <DIGITAL LINK> terminal and the
<局域网> terminal to transmit the Ethernet signal.
ENGLISH - 155