Table of Contents
Advertisement
Inserting an SD card
1)
Insert the card securely into the SD card slot with the front of the card facing outward, from the side
with cut corner.
Attention
f When using the miniSD memory card or the microSD memory card, always use the dedicated miniSD memory card adapter or the microSD
memory card adapter, and insert/eject together with the adapter.
f Take care not to leave the adapter in the SD card slot.
f Do not insert anything other than the SD card, such as metal or foreign object, into the SD card slot.
f Please refrain from frequent insertion and ejection of the SD card in short period of time. Wait for at least five seconds after inserting until
ejecting the SD card, and wait for at least five seconds until inserting it again after ejecting. The projector requires approximately five
seconds to recognize the insertion or ejection of the SD card.
Ejecting the SD card
1)
Confirm that the SD card indicator <SD> is not blinking.
2)
Lightly press center of the SD card.
3)
Hold onto the slightly ejected SD card and pull it out.
f Note that pulling out the card forcibly while it is inserted will cause a malfunction.
Attention
f Do not perform the following when the projector is accessing the SD card (while the SD card indicator <SD> is blinking).
g Ejecting the SD card
g Turning off the power of the track system
g Applying vibration or shock
f Do not perform the insertion and ejection of the SD card in short period of time. Wait for at least five seconds after inserting until ejecting
the SD card, and wait for at least five seconds until inserting it again after ejecting. The projector requires approximately five seconds to
recognize the insertion and ejection of the SD card.
54 - ENGLISH
Chapter 3 Basic Operations — Using SD cards
SD card
Advertisement
Table of Contents
