Table of Contents
Advertisement
[EXTRON XTP]
4)
Press as to select [STORE], and press the <执行> button.
f The confirmation screen is displayed.
5)
Press qw to select [OK], and press the <执行> button.
[NETWORK STATUS]
Display the status of the projector network.
1)
Press as to select [NETWORK STATUS].
2)
Press the <执行> button.
f The [NETWORK STATUS] screen is displayed.
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[DNS1]
[DNS2]
[MAC ADDRESS]
Note
f The network setting is common for the <局域网> terminal and the <DIGITAL LINK/局域网> terminal.
[DIGITAL LINK MENU]
When the optional DIGITAL LINK output supported device (Model No.: ET-YFB100C) is connected to the
<DIGITAL LINK/局域网> terminal, the main menu of the connected DIGITAL LINK output supported device is
displayed. Refer to the Operating Instructions of the DIGITAL LINK output supported device for details.
Note
f [DIGITAL LINK MENU] cannot be selected when the [NETWORK] menu → [NETWORK CONTROL] → [EXTRON XTP] is set to [ON].
f The operation guidance for the "RETURN" button is in the menu screen of the Digital Interface Box. The projector does not have the
"RETURN" button, but the same operation is available with the <菜单> button.
[Art-Net SETUP]
Make settings to use the Art-Net function.
1)
Press as to select [Art-Net SETUP].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON(2.X.X.X)]
[ON(10.X.X.X)]
[ON(MANUAL)]
f Proceed to Step 3) when anything other than [OFF] is selected.
3)
Press the <执行> button.
f The [Art-Net SETUP] screen is displayed.
4)
Press as to select an item, and press qw to switch the setting.
[NET]
[SUB NET]
152 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Set to [ON] when connecting the "XTP transmitter" of Extron Electronics to the
<DIGITAL LINK/局域网> terminal.
Set to [OFF] when connecting the optional DIGITAL LINK output supported device (Model No.:
ET-YFB100C).
For details of the "XTP transmitter", visit the website of Extron Electronics.
URL http://www.extron.com/
Displays the status of use of the DHCP server.
Displays the [IP ADDRESS].
Displays the [SUBNET MASK].
Displays the [DEFAULT GATEWAY].
Displays the address of the preferred DNS server.
Displays the address of the alternate DNS server.
Displays the [MAC ADDRESS].
Disables the Art-Net function.
Enables the Art-Net function and sets the IP address to 2.X.X.X.
Enables the Art-Net function and sets the IP address to 10.X.X.X.
Enables the Art-Net function and uses the IP address set in [NETWORK SETUP].
Enter [NET] to be used when the projector processes Art-Net.
Enter [SUB NET] to be used when the projector processes Art-Net.
Advertisement
Table of Contents
