Table of Contents
Advertisement
About your projector
Remote control
1
Remote control signal transmitter
2
Power <v/b> button (v standby / b power on)
Turns on/off the power of the projector. (x page 46)
3
<MIRRORING> button
Switches the input to MIRRORING. (x page 51)
4
<SIGNAGE> button
Switches the input to signage. (x page 51)
5
<MEMORY VIEWER> button
Switches the input to Memory Viewer. (x page 51)
6
asqw buttons/<ENTER> button/<RETURN> button
Used to operate the menu screen. Also used when entering
[SECURITY PASSWORD].
7
<AV MUTE> button
Used to turn off the image and audio temporarily. (x page 56)
8
<DEFAULT> button
Resets the settings of the sub-menu to the factory defaults.
(x page 59)
9
<MENU> button
Displays the main menu. (x page 58)
Attention
f Do not drop the remote control.
f Avoid contact with liquids or moisture.
f Do not attempt to modify or disassemble the remote control.
f Observe the following instructions that are indicated on the caution label at the back of the remote control:
g Do not use a new battery together with an old battery.
g Do not use unspecified batteries.
g Make sure the polarities (+ and -) are correct when inserting the batteries.
For other instructions, read the instructions related to batteries that are described in "Read this first!".
22 - ENGLISH
Chapter 1 Preparation — About your projector
1
3
2
4
5
6
7
8
9
10
11
Caution label at the back of the remote control
12
13
14
15
16
17
10 <ZOOM> button/<FOCUS> button
Displays the lens menu and adjusts the projection lens.
(x page 52)
11 <VOL+>/<VOL-> buttons
Adjusts the volume of audio output. (x page 55)
12 <LIGHTING> button
Use to turning on/off the spotlight. (x page 55)
13 <Panasonic APP> button
Switches the input to Panasonic APPLICATION. (x page 51)
14 <HDMI> button
Switches the input to HDMI. (x page 51)
15 <ID ALL> button
Used to simultaneously control all the projectors with a
single remote control in a multiple projector environment.
(x page 26)
16 <ID SET> button
Sets the ID number of the remote control in a multiple projector
environment. (x page 26)
17 Number (<1> - <6>) buttons
Used in a multiple projector environment.
Used to enter ID number or password.
Advertisement
Table of Contents
