Multiscope Hardware Configuration, Mxr/Exr-Series-At A Glance - Keysight Technologies UXR Series Hardware Configuration Manual

MultiScope Hardware Configuration, MXR/EXR-Series—At a Glance
You can connect two Infiniium MXR/EXR-Series oscilloscopes together to create
an oscilloscope system with up to 16 channels.
Oscilloscopes
Infiniium MXR/EXR-Series oscilloscopes:
Required
• Each oscilloscope adds eight or four input channels. You can connect two
• The MultiScope system is synchronized using the AUX OUT signal on the second
Expansion
For MultiScope systems made up of two MXR/EXR-Series oscilloscopes, this
multi-frame cable kit is available:
Accessories
• N2124A Multi-Frame Cable Kit for Two MXR/EXR-Series Oscilloscopes.
Not Included
MultiScope systems also require:
• Equipment rack(s).
• Rackmount kits for the oscilloscopes (MXR2RACK for MXR-Series or
• MultiScope control software.
• Remote interface connection between host computer and the each
MultiScope
To control MultiScope systems and analyze captured data, you can use:
Control Software
• Infiniium oscilloscope software on the Leader oscilloscope. MultiScope
• D9010BSEO Infiniium Offline oscilloscope analysis software on a host
This software allows time-synchronized acquisitions for multiple-oscilloscope
systems with very low oscilloscope-to-oscilloscope jitter and drift. This software
can be used to configure, capture, and store real-time voltage signals.
Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide
oscilloscopes in a rack.
(follower #1) oscilloscope, power divider, and a synchronization port
(channel 4, for example) on both oscilloscopes.
EXR2RACK for EXR-Series).
oscilloscope in the system (for controlling the individual oscilloscopes and
moving captured data to the host computer).
Ethernet LAN and instrument USB are the most common interface options
used.
software is now included as a standard feature.
computer. MultiScope software is now included as a standard feature.
5