Keysight Technologies UXR Series Hardware Configuration Manual page 29

1250-2818
right-angle
SMA adapter
Analog channel input adapter(s) necessary to connect to the 1250-2818
right-angle SMA adapter are included with the UXR-Series oscilloscope:
UXR-Series oscilloscope
input connector type
3.5 mm
1.85 mm
1.0 mm
Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide
Calibration Cable Connections
(Follower #1 Front)
Cal Out
1250-3377 push-on SMA adapter
54964-61632
cable
1250-3758
SMA adapter
You will connect this cable-end to
Leader and Follower oscilloscope
inputs as prompted during the
"Calibrate" procedure in the Infiniium
software's Hosted Setup dialog box.
54964-61632
cable
Adapter needed for channel deskew cable connection
5061-5311 adapter, 3.5 mm female to female
5061-5311 adapter, 3.5 mm female to female
5067-1393 adapter, 1 mm ruggedized female to 2.92 mm
female
5
Next Steps
1250-2818
right-angle
SMA adapter
29