Mounting Oscilloscopes In Rack - Keysight Technologies UXR Series Hardware Configuration Manual

Mounting Oscilloscopes in Rack

Oscilloscopes take 7U of rack space and the power divider assembly takes 1U of
rack space.
Locate oscilloscopes in the rack so that the overall rack center of gravity is about half-way up
N OTE
the rack. Because of cable lengths, use the recommended power divider location relative to
the Leader and Follower oscilloscope locations.
Figure 5 Oscilloscope Locations in Rack
Using the instructions in the Rack Mount Kit User's Guide, mount oscilloscopes in
their designated rack locations.
Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide
Top of Rack
Leader
Oscilloscope
(7U)
Follower #1
Oscilloscope
(7U)
Follower #2
Oscilloscope
(7U)
Power divider (1U)
Follower #3
Oscilloscope
(7U)
Follower #4
Oscilloscope
(7U)
Three- to Five-Oscilloscope Systems, UXR-Series
3
19