Uxr-Series Multiscope Calibration Connections - Keysight Technologies UXR Series Hardware Configuration Manual

5
Next Steps

UXR-Series MultiScope Calibration Connections

Part of what the MultiScope control software provides is the ability to
automatically deskew multiple oscilloscope frames and channels using a
calibration procedure.
The hardware for performing MultiScope calibration is included in the N2164A
UXR-Series Multi-Frame Base Kit. These parts are used to create a long
calibration cable:
Part number
54964-61632
1250-2818
1250-3758
1250-3347
The long calibration cable is connected from the Follower #1 oscilloscope's Cal Out
output to MultiScope system input channels, as prompted by the MultiScope
control software's calibration procedure.
28
Qty Description
2 1 m phase-stable cable
2 Right-angle male to female SMA adapter
1 Female/female SMA adapter 3.5 mm (f)
1 Push-on male SMA to female SMA adapter
Keysight UXR-Series and MXR/EXR-Series MultiScope Hardware Configuration Guide