Programming Code; Query - Newland NLS-HR200 Quick Start Manual

请更换节标题

Programming Code

Query

"Send Product Info", the engine sends product information to the
Host immediately."Send Sys Info when Power ON", the engine sends
product information through RS232(only) to the Host after Power ON.
Send Product Info
Send Sys Info when Power ON
The system information is provided as follows:
Title
Firmware Ver
Build Time
Device ID
App Ver
uIMG Ver
Date
S/N
ESN
Manufacture ID
Interface
1D
2D
Scan Mode
Remarks
Device Firmware Version
Device Firmware Version Establishing Time
Device Type
Device Application Version
Device uIMG Version
Device Manufacture Date
Device serial number
User-defined device serial number
Device Name
1 types of communication interfaces:
TTL232(EM3000) or RS232(EM2027), baud rate, parity check, data bits, stop bit
Indicate that reading 1D is allowed.
Indicate that reading 2D is allowed.
1. Manual Scan
2. Auto Scan
3. Continuous Scan
Do not Send Product Info when Power ON
(Factory Default)
Code Programming ON
Code Programming OFF
E-11