Securing The Protected Site; Security-Related Pushbuttons; Preparing To Arm; Arming 'Away - Visonic PowerMaxComplete User Manual

SECURING THE PROTECTED SITE

2. Securing The Protected Site

Security-Related Pushbuttons

Key Function
Arming when nobody is at home
Arming when people remain at home
Canceling the entry delay upon arming
('AWAY-INSTANT' or 'HOME-INSTANT')
Disarming the system and stopping
alarms
Testing the system (see Chapter 6 -
Conducting Walk Test).

Preparing to Arm

Before arming, make sure that READY is displayed:
READY HH:MM
If Ready is displayed, all zones are secured, and you
may arm the system any way you choose.
If at least one zone is open (disturbed), the display
will read:
NOT READY
If NOT READY is displayed because of unsecured
zone, click to review the numbers and
names of all open zones one by one.
Let us assume that zone 2 (the back door) and zone
13 (the kitchen) are open. To investigate, proceed as
follows:
PRESS RESULTANT DISPLAY
NOT READY
BACK DOOR
(alternating)
Z2 OPEN
KITCHEN
(alternating)
Z13 OPEN
None (see (after 10 seconds)
note below)
NOT READY
Note: To quit immediately at any stage, press
.
8
It is highly recommended to fix the open zone(s),
thus restoring the system to the state of "ready to
arm". If you do not know how to do this, consult your
installer.
IMPORTANT! All arming procedures below are
based on the assumption that quick arming has been
enabled by the installer. If quick arming is disabled,
the PowerMaxComplete
your security code before arming.

Arming 'AWAY'

If the system is READY, proceed as shown:
HH:MM
state.

Arming 'HOME'

If all perimeter zones are READY, and quick arming
is allowed, proceed as shown:
HH:MM

Switching from 'HOME' to 'AWAY'

Do not disarm the system - just press
response will be the same as in ARMING AWAY
HH:MM
above. Vacate the premises before the exit delay
expires.
will prompt you to enter
PRESS RESULTANT DISPLAY
ARMING AWAY
PLEASE EXIT NOW
↓
Vacate the premises (Exit delay)
AWAY
ARM indicator lights steadily during the armed
PRESS RESULTANT DISPLAY
ARMING HOME
Move to interior
↓
(Exit delay)
zone
HOME HH:MM
ARM indicator flashes during the armed state.
↓
↓
↓
. The
D-300886