Table of Contents
Advertisement
Chapter 2. Camera Installation
2-1. Ceiling Mount installation
Preparation – Remove the dome cover
LAN Cable assembly
1) Drill a hole on the rubber seal plug and insert an Ethernet cable through the opening.
2) Strip part of the sheath from the Ethernet cable.
3) You will need an RJ45 crimping tool to attach the Ethernet wires to a connector. When done,
connect the cable to the camera's Ethernet RJ45socket.
1. Use the supplied security torx key to loosen (not remove) the
three cover screws.
2. Loosen the three screws (marked with the triangle icon) on the
dome base.
3. Remove the back case.
21
Advertisement
Table of Contents
